Bk-precision 4014B - Datasheet Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Générateurs Bk-precision 4014B - Datasheet. B&K Precision 4014B - Datasheet User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
DDS Sweep Function Generators
Models 4014B and 4040B
Data Sheet
www.bkprecision.com
Technical data subject to change
© B&K Precision Corp. 2013
Models 4014B and 4040B are 12 MHz and
20 MHz DDS (direct digital synthesis) function
generators that generate stable and precise sine,
square, and triangle waveforms. Both models
provide variable output voltages from 0 to
10 Vpp into 50 (up to 20 Vpp into open
circuit), linear and logarithmic sweep, AM/FM
modulation, built-in counter, and a continuously
variable DC offset that allows the output to be
injected directly into circuits at the correct bias
level. Separate output amplitude and DC offset
amplifiers let you set a large DC offset (e.g.
± 4.99 V ) with a small amplitude output signal
(e.g. 10 mV), a feature typically found in more
expensive generators.
The 4014B and 4040B are both designed
with a dual technology architecture, combining
traditional DDS technology with a low-jitter
square wave generator. The instruments
generate a 2-point waveform to simulate the
amplitude and use a high accuracy PLL
(phase-locked loop) circuit for timing. Compared
to signals generated by typical low-cost DDS
function and arbitrary waveform generators, this
implementation significantly minimizes jitter and
improves edge stability of square waves. The
improved signal integrity allows these generators
to be used for simulating reliable clock signals,
generating triggers, or validating serial data
buses.
These models are suitable for education and
other applications that require digital function
generators with sweep and modulation
capabilities.
Features & Benefits
Sine and square waveforms up to
12 MHz (4014B) or 20 MHz (4040B)
Triangle/ramp waveforms up to
1 MHz (4014B) or 2 MHz (4040B)
Bright color display with waveform preview
Linear and logarithmic sweep
AM/FM modulation
Independent output and DC offset amplifiers
allow for small amplitude output signals with
large DC offsets
Low-jitter square wave generation
Adjustable duty cycle
Output ON/OFF button
Internal/external triggering
Gate and burst mode (4040B only)
Built-in counter
USB interface
SCPI-compliant command set
Short circuit and overvoltage protection on all
inputs and outputs
Model 4014B 4040B
Sine and square frequency range 0.01 Hz - 12 MHz 0.01 Hz - 20 MHz
Triangle/ramp frequency range 0.01 Hz - 1 MHz 0.01 Hz - 2 MHz
Vue de la page 0
1 2 3

Résumé du contenu

Page 1 - DDS Sweep Function Generators

DDS Sweep Function GeneratorsModels 4014B and 4040BData Sheetwww.bkprecision.comTechnical data subject to change© B&K Precision Corp. 2013Models 4

Page 2 - Rear panel

www.bkprecision.comDDS Function GeneratorsModels 4014B and 4040B2OutputOn/Off buttonMain outputUSB interfaceModulation input connectorTrigger/counter

Page 3 - Three-Year Warranty

www.bkprecision.comDDS Function GeneratorsModels 4014B and 4040B3*For square wave, resolution is up to 4 digits when frequency is > 20 kHz.Note: Al

Modèles reliés 4040B - Datasheet

Commentaires sur ces manuels

Pas de commentaire