BK Precision 4084AWG Manuel d'instructions télécharger pdf (Page 6)

onlinecomponents.com

4080 series Function & Arbitrary/Function Generators –Instruction Manual

2. SPECIFICATIONS

2.1 Function Generator

Waveform Characteristics

Main Waveforms: Sine, square

Waveform Amplitude resolution: 12 bits

Sample Rate: 200MSa/s (4084, 4084AWG, 4085, 4086, 4086AWG)

300MSa/s (4087)

Sine:

Harmonic Distortion of Sine Wave:

≤ - 50dBc (frequency ≤ 5MHz)

≤ - 45dBc (frequency ≤ 10MHz)

≤ - 40dBc (frequency ≤ 20MHz)

≤ - 35dBc (frequency ≤ 40MHz)

≤ - 30dBc (frequency > 40MHz)

Total Harmonic distortion: 0.1% (20Hz ~ 100kHz)

Square:

Rise and Fall Time of Square Wave: ≤15ns

Note: Test conditions for harmonic distortion, sine distortion, rise/fall time: Output

Amplitude 2Vp-p, Environmental temperature: 25℃±5℃

Build in standard and complex (arbitrary) waveforms:

27 build-in standard and complex waveforms.

Sine, Square, Triangle, Positive Ramp, Falling Ramp, Noise, Positive Pulse, Negative

Pulse, Positive DC, Negative DC, Stair wave, Coded Pulse, Full wave rectified,

Half-wave rectified, Sine transverse cut, Sine vertical cut, Sine phase modulation,

Logarithmic, Exponential, Half-round, SINX/X, Square root, Tangent, Cardiac,

Earthquake, Combination

Waveform Length: 4096 dots

Amplitude Resolution: 10 bits

Pulse Wave:

Duty Cycle: 0.1% ~ 99.9% (below 10kHz), 1% ~ 99% (10kHz ~ 100kHz)

Rise/Fall Time: ≤100ns （Duty cycle 20%）

DC signal characteristics:

DC range: ≤ 10mV – 10V (high impedance)

DC Accuracy: ≤ ±5% of setting +10mV (high impedance)

Module for user defined arbitrary waveform generation (models 4084AWG and 4086AWG only)

Number of memory locations for arbitrary waveforms: 8

Length of waveforms：8~16000 points

Resolution of waveform amplitude：10 bits

Frequency range：100μHz~100kHz

1 2 3 4 5 6 7 8 9 10 11 ... 60 61

Pas de commentaire

BK Precision 4084AWG Manuel d'instructions Page 6