Bk-precision 830C - Manual Manuel d'utilisateur télécharger pdf (Page 64)

2. Once the desired measured reading is

displayed, press the button once to

store the reading as the “standard” value or

test reference value. At this point, the “TOL”

will be displayed on the screen, indicating that

the tolerance mode is activated.

3. To select the tolerance range, press the

button once more. For each button

press, the meter will cycle through the

tolerance range percentage in this order: 1%,

5%, 10%, 20%. These percentage ranges will

also be indicated on the LCD display by the

indicators “1%”, “5%”, “10%”, or “20%”

respectively. The component to be tested will

be verified within the selected tolerance % of

the “standard” value or test reference value

(as configured from step 2).

4. Within a few seconds, an audible tone will be

heard.

One single “beep” or tone means the

component is within tolerance.

Three “beeps” or tones means the component

is out of tolerance.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 112 113

Pas de commentaire

Bk-precision 830C - Manual Manuel d'utilisateur Page 64